Marshall Stability Test Machine with Load Ring
The HR-AS5005 50kN Capacity Marshall Stability Test Machine with Load Ring is used to determine the maximum load and flow values of bituminous mixtures. The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounting compression frame with motor and worm gear housed within the base unit.
Platen rate is 50.8 mm/min also maintained under load thanks to an overpowered electric motor.
For safety, the up and down travel of the lower platen is limited the use of limit switches. The machine can be hand operated by a lateral hand wheel for calibration purposes.
The Marshall Stability Test Machine with Load Ring is supplied complete with 50 kN capacity Load Ring with 0,01 mm resolution Analog Dial gauge, 30 x 0.01 mm Dial Gauge and Breaking Head (Stability Mould) for Ø 4" Marshall samples.
Breaking Head (Stability Mould) for Ø 6" Marshall samples, Indirect Tensile Splitting Device for Ø 4" Marshall samples, Indirect Tensile Splitting Device for Ø 6" Marshall samples, Loading Strips, Ø 100 mm, for Tensile Splitting Device, Loading Strips, Ø 160 mm, for Tensile Splitting Device and Indirect Tensile Test Jig for Compacted Bituminous Samples with 25x0,01 mm Analog Dial Gauge for Ø 100 mm (4”) & Ø 150 mm (6”) samples should be ordered separately.
Platen rate is 50.8 mm/min also maintained under load thanks to an overpowered electric motor.
For safety, the up and down travel of the lower platen is limited the use of limit switches. The machine can be hand operated by a lateral hand wheel for calibration purposes.
The Marshall Stability Test Machine with Load Ring is supplied complete with 50 kN capacity Load Ring with 0,01 mm resolution Analog Dial gauge, 30 x 0.01 mm Dial Gauge and Breaking Head (Stability Mould) for Ø 4" Marshall samples.
Breaking Head (Stability Mould) for Ø 6" Marshall samples, Indirect Tensile Splitting Device for Ø 4" Marshall samples, Indirect Tensile Splitting Device for Ø 6" Marshall samples, Loading Strips, Ø 100 mm, for Tensile Splitting Device, Loading Strips, Ø 160 mm, for Tensile Splitting Device and Indirect Tensile Test Jig for Compacted Bituminous Samples with 25x0,01 mm Analog Dial Gauge for Ø 100 mm (4”) & Ø 150 mm (6”) samples should be ordered separately.
EN 12697-34, 12697-23, 12697-12, 13108, ASTM D1559, AASHTO T245
